Digital Projection M-Vision Cine 400 3D series, Руководство пользователя

Страница: 37 / 58

Digital Projection
M-Vision Cine 400 3D series
A TOUR OF THE MENUS Operating Guide
Revision C, July 2014
Main menu continued from previous page
Presets
The current image settings can be saved a preset, which you can recall
later. The default settings can be recalled at any time as well.
Up to four custom presets can be stored for each input source you use.
The following settings are saved in a preset:
● From the Main menu — Aspect Ratio and Overscan
● From the Image menu — Brightness , Contrast , Saturation , Hue ,
Sharpness
and
Noise Reduction
● From the
Advanced Image
menu —
Colorspace
,
Gamma
,
Color
Temperature , Color Gamut , RGB Adjust , RGB Gains , Brilliant
Color and Adaptive Contrast
To save a preset:
1. From the
Main menu, open Presets .
2. Highlight Save Preset on the left and then move to the list on the right.
Select the preset you wish to save and press ENTER / SELECT .
To recall a saved preset:
1. From the
Main menu, open Presets .
2. Highlight Recall Preset on the left and move to the list on the right.
Select the preset you wish to recall, then press
ENTER
/
SELECT
.
Press
MENU
to leave the Presets page.
Alternatively, you can recall presets A, B and C with the
USER MEMORY
buttons on your remote control.
Overscan
This setting, if switched on, removes unwanted artefacts from the edges
of your image by cropping the edges or increasing the size of the image to
force the edges off-screen.
Unwanted artefacts along the image edges usually occur when the projector
is connected to a low quality input souce.
Choose from
Off , Crop or Zoom .
Notes
Settings are saved ONLY for the
current input source.
Preset D is only accessible
through the Presets page of
the menu, and not through the
remote.
Op-07
Save Preset
MAIN >> Presets >>
Recall Preset Preset A
Preset B
Preset C
Preset D
Default
2
PIC
MUTE
4
B
SHARP
O-SCAN NR GAMMA
C-TEMP TEST BRI-C
3D
SWAP
3D
FORMAT
2D/3D
ENTER
SOURCE
3
6
1
ASPECT
RATIO
MENU
USER MEMORY
C A
|
ON POWER OFF
User Memory buttons
on the remote