Digital Projection M-Vision Cine 230, Руководство пользователя

Страница: 49 / 92

Rev E July 2014 Page 4.9
Digital Projection
M-Vision Cine 230, Cine 260, Cine 400
User Manual 4. Controlling the projector
Notes
To select a different menu,
press MENU once or
twice, so that no items are
highlighted, then use the
and keys to select a
different page
.
To exit from the menus
completely, you may need to
press up to three times.
Image changes made using
the menus will take effect
immediately.
Some menu items may be
greyed out - unavailable due to
the effect of settings made in
other menus, or due to the type
of input signal.
For more information about
the Aspect ratio settings,
see Screen requirements in
section 2. Installation .
Main menu
• To display the menus, press MENU on the remote control or the projector
control panel.
• Use the and keys to select the Main menu page,
• To select a menu item, use the and keys until the item is highlighted.
Aspect Ratio
• Use the and keys to select from:
16:9 the image is scaled to fill the DMD (and thus, a 16:9 screen).
Theaterscope the image is scaled such that a 2.35:1 image will be displayed
at the correct aspect ratio when the projector is fitted with an
anamorphic lens. Thus an image with an aspect ratio of 2.35:1
can be displayed using the full 16:9 resolution of the DMD.
4:3 the image is scaled to fit a 4:3 screen, using the full height of the
DMD.
4:3 Narrow to be used for 4:3 images in combination with an anamorphic
lens. The image is scaled to fit the DMD vertically, but squeezed
horizontally such that the lens will stretch it to the correct ratio.
Native the image is displayed with no scaling, at its original resolution, in
the centre of the screen.