Digital Projection M-Vision Cine 230, Руководство пользователя

Страница: 56 / 92

Page 4.16 Rev E July 2014
4. Controlling the projector Digital Projection
M-Vision Cine 230, Cine 260, Cine 400
User Manual
Colour Gamut
In most cases, the Auto setting will determine the correct colour gamut to use. If it
does not, you can select the appropriate setting manually.
Each setting defines the precise hue of each primary (red, green and blue) and
secondary (yellow, cyan and magenta) color component used to generate the
image.
• Use the and keys to select from:
Auto
SMPTE-C
for NTSC, 480i and 480p sources
EBU for PAL, SECAM, 576i and 576p sources
REC709 for most other sources
Native
uncorrected
Brilliant Color®
Brilliant Color
®
allows for increased projector brightness and improved color
saturation by enabling the yellow segments on the colour wheel.
• Use the and keys to select from:
On (recommended)
Off
Adaptive Contrast
Adaptive Contrast expands the light and dark portions of the contrast curve of the
image, depending on the mean luminance of the image.
• Use the and keys to select from:
On
Off
Notes
To exit from the menus
completely, you may need to
press up to three times.
Image changes made using
the menus will take effect
immediately.
Some menu items may be
greyed out - unavailable due to
the effect of settings made in
other menus, or due to the type
of input signal.
In most cases, Brilliant Color
should be left On – switching
it Off will result in reduced
brilliance and contrast.
Cine 260 and 400 only – the
Cine 230 does not have any
yellow segments.
Setting Adaptive Contrast to
On will affect any image quality
settings made in other menus.
Advanced menu continued