Digital Projection M-Vision Cine 230, Руководство пользователя

Страница: 74 / 92

Page 6.2 Rev E July 2014
6. Appendix Digital Projection
M-Vision Cine 230, Cine 260, Cine 400
User Manual
Troubleshooting
Problem Possible solutions
The red ISSUE indicator is illuminated
continuously or flashing.
Check the Error codes detailed on the next page.
The projector will not power up. Check that the mains plug is plugged in and that the mains supply is switched on.
Check that the lamp door is closed properly.
Check any external fuses or breakers.
The projector will not power up shortly
after being switched off.
To protect the lamp, the projector cannot be switched on when in it is in cool-
down mode. Wait until the power indicator shows steady blue. showing that it is in
standby mode.
The projector shuts down after it has
been in use for some time.
The projector may be overheating. Check that the air inlets and outlets are clear
of any obstruction.
See section 5. Maintenance, Cleaning the fans
It is possible to increase the speed of the fans for use in a high altitude
environment:
See section 4. Controlling the projector, System menu
No image is displayed. See section 5. Maintenance, Changing the lamp
Check that the input source is switched on and connected to the projector
correctly.
Check that the correct image source is selected.
Check that the brightness and contrast settings are set correctly.
See section 4. Controlling the projector, Using the control keys and Main
menu
The projector may be overheating. Check that the air inlets and outlets are clear
of any obstruction.
The image does not fit the screen
correctly.
Check that the projector and screen size are positioned correctly, and that the
zoom is adjusted correctly.
See
section 2. Installation, Screen size vs throw distance
Check the aspect ratio setting.
See section 4. Controlling the projector, Main menus
Uneven image quality. Check that the projector is parallel to the screen.
Check that the screen is flat, and securely mounted.