Digital Projection HIGHlite 740 1080p, Инструкция по установке и быстрому запуску

Страница: 74 / 157

page 65
Digital Projection HIGHlite 740 Series
Operating Guide
USING THE PROJECTOR
Rev I February 2015
PIP menu
Two images can be combined, in three different ways using this feature. The PIP menu is available
only when
Setup
>
System
>
Configuration
is set to
PIP
.
Option
•
Select PIP , PAP , or POP mode from the drop-down list.
Input
•
Select an
Input
for the sub-image from the drop-down list. The inputs are divided into two groups
– the main image must be from one group, and the sub-image must be from the other group.
•
Group A:
COMPOSITE 1, COMPOSITE 2
,
S-VIDEO
and
3G-SDI
•
Group B:
COMPONENT, VGA
,
DVI
,
HDMI
and
DVI-A
The inputs from the same group as the main input signal will appear disabled in the list.
Size
•
Select a size for the sub-image from the drop-down list.
Position
•
Select one of the preset positions for the sub-image from the drop-down list.
Custom Position
•
If you have chosen Custom from the Position drop-down list, then you can use the sliders to
position the image manually.
Notes
Main Menu
PIP
This menu is available only when
Setup
>
System
>
Configuration
is
set to
PIP
.
PIP
,
PAP
and
POP
are NOT
possible when
Input
is set to
Test
Pattern .
The
Position
settings apply ONLY
to PIP mode. PAP and POP are
always as shown in these examples.
PIP: Picture In Picture
PAP: Picture And Picture POP: Picture Opposite Picture