Digital Projection HIGHlite 740 1080p, Инструкция по установке и быстрому запуску

Страница: 68 / 157

page 59
Digital Projection HIGHlite 740 Series
Operating Guide
USING THE PROJECTOR
Rev I February 2015
Edge Blend procedure (continued)
4. Set up the array.
For each projector, open the Edge Blend menu and enter Array Width , Array Height , Array H Position and Array V Position .
Array Width and Array Height should be identical for all projectors. These settings define the size of the array. For example, a two-by-
two array will have the following values:
•
Array Width = 2
•
Array Height = 2
The top left projector will have Array H Position = 0 and Array V Position = 0 .
1
Top left
Array H Position = 0
Array V Position = 0
2
Top right
Array H Position = 1
Array V Position = 0
3
Bottom left
Array H Position = 0
Array V Position = 1
4
Bottom right
Array H Position = 1
Array V Position = 1
2 1
3 4
Notes