![Digital Projection 35HD-T Скачать руководство пользователя страница 75](http://html1.mh-extra.com/html/digital-projection/35hd-t/35hd-t_user-manual_2499285075.webp)
105-453B January 2007
Page 4.23
Digital Projection
LIGHTNING 35HD-T, 40HD-T
User Manual
4. Using the Menus
Notes
Do not make changes to the
networking con
fi
guration
unless you understand what
you are doing, or have taken
advice from your Network
Manager.
If you make a mistake, it is
possible that you will lose
contact with the projector.
Always double-check your
settings before pressing the
APPLY button.
Always keep a written note of
the original settings, and any
changes you have made.
When entering the channel
number, a leading zeroes
must
be used for single digit
numbers:
eg
02
If the
WEP
security key is to be
used, then the projector must
be set to the same method and
number of bits as the computer
or wireless access point.
Con
fi
g menu...
Network con
fi
guration...
Wireless LAN...
Encryption
Settings...
SSID
Channel
WEP key
Mode
Menu buttons...
Con
fi
gure ethernet #1
Con
fi
gure wirelss LAN
Encryption
Press the
ENCRYPTION
button.
To change the SSID, press the
SSID
fi
eld.
Use keypad to enter the (up to) 12 digits SSID. This will appear in the
fi
eld at the
top of the keypad.
Press
ENTER
to transfer the SSID from the keypad display to the SSID
fi
eld.
To change the channel number, press the
CHANNEL
fi
eld.
Use keypad to enter the channel number (01 - 16, including a leading zero for
single
fi
gure numbers). This will appear in the
fi
eld at the top of the keypad.
Press
ENTER
to transfer the number from the keypad display to the Channel
fi
eld.
To change the WEP Key, press
WEP Key
a number of times to cycle through
the options. Choose from:
Disabled
64 bits
(0x1234567890) (10
hex
digits)
128 bits
(0x12345678901234567890123456) (26
hex
digits)
Pass Phrase
(abcdefghijklmnopqrstuvwx) (24 characters)
Press the
WEP Key
fi
eld.
Use keypad to enter the key. This will appear in the
fi
eld at the top of the
keypad.
Press
ENTER
to transfer the key from the keypad display to the WEP Key
fi
eld.
To change the mode, press the
MODE
button to choose from:
Infrastructure Access Point
(usual mode for an established corporate network)
Adhoc peer to peer
(usual mode for a single computer and projector)
•
•
•
•
•
Содержание 35HD-T
