manualshive.com logo in svg

Digital Projection 35HD-T, Руководство пользователя

Поделиться
Скачать
Digital Projection 35HD-T Скачать руководство пользователя страница 37

105-453B January 2007 

Page 2.15

Digital Projection 

LIGHTNING 35HD-T, 40HD-T 

User Manual 

2. Installation

Notes

 Each time a new lens is 

fi

 tted to the projector, the 

calibration procedure must 
be carried out. See Lens 
menu, in Section 4. Using the 
menus.

  Be careful not to scratch 

the lens surfaces. If you do 
accidentally touch a lens, then 
clean the surface using a lens 
paper.

 The zoom drive mechanism 

should always be set to the 
engaged position, even when 
using the non-zoom lens, as 
it provides an extra level of 
protection, should the lens 
release lever fail.

Fitting the lens

Turn the lens release lever anti-clockwise to open the lock.

Turn the zoom drive mechanism anti-clockwise to disengage the drive.

Insert the lens into the lens aperture, making sure that the two notches on the 
lens engage with the locating tab inside the lens mount.

Turn the lens release lever clockwise to lock the lens in place. When the lock is 
fully closed, the lever should feel loose.

Turn the zoom drive mechanism clockwise to engage the drive.

•

•

•

•

•

Lens 

release 

lever

Zoom drive 

mechanism

Содержание 35HD-T

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды