Digital Monitoring Products
XR150FC/XR550FC Series Installation Guide
4
INSTALL THE PANEL
Mount the Enclosure
The XR150FC/XR550FC Series panel enclosure must be mounted using the four mounting holes shown in Figure 2.
Mount the enclosure in a secure, dry place to protect the panel from damage from tampering or the elements. It is not
necessary to remove the panel PCB when installing the enclosure.
The enclosure dimensions are 13.44” H X 17.1” W X 4.8” D.
Note:
When using the XR150FC/XR550FC Series panel for listed applications, use the Model 350, 349, 341, or 352S
enclosure for standby batteries.
Battery shelf holds up to two batteries. Maintain
minimum spacing of 1/4” between the batteries
and any modules mounted in enclosure.
A
B
C
Panel
Transformer
Enclosure Mounting Holes
D
E
Dual 1-3/4” and 1-3/8” Knockouts
Module Mounting Holes
F
Battery Shelf
E
E
E
D
D
C
C
C
C
A
F
B
Figure 2: XR150FC/XR550FC Enclosure
