Digital Equipment FP-770T Series, Руководство пользователя

Страница: 43 / 58

Touch Panel Commands
4-5 FP-770T User's Manual
Connecting a PS/2 mouse (When SW1-1 switch is ON)
When the FP's PS/2 mouse connection mode is selected and the User's OS
supports the PS/2 mouse, touch panel data is converted to PS/2 mouse data, and
output through the MOUSE/PC connector. In this case, the I/F program that
converts the coordinates output from the FP to the host (PLC) into the display
device coordinates is not necessary.
(1) Setting up the mouse according to the current OS
Turn the FP and host (PLC)'s power on, and set up your OS's mouse and
driver settings so that the PS/2 mouse can be used.
•
For information about the mouse's setup procedure, refer to your
OS maker's Operation manual.
(2) Connecting the data cable
Connect the optional mouse/keyboard cable to the MOUSE/PC connector
provided at the rear of the FP and to the host (PLC)'s mouse connector
port.
Chapter 1 Introduction
(3) Connecting the mouse
The FP's touch panel can be used together with a mouse. Connect the
mouse to the MOUSE/Mouse connector at the rear of the FP.
• After connecting the mouse, re-start the FP's OS.
• When Windows 95 or Windows NT is used, set the “Control panel
- Mouse - Operation” feature to the slowest pointer speed and hide
the pointer trace.
• To use OS/2, set the SW1-7 switch to ON.
3-3 Operation Mode Setup and Display Positioning
•
Do not connect this cable when the power to the FP
and the host (PLC) are both ON.
• When a mouse is connected to the FP, it may not operate
normally, depending on the combination of host (PLC)
and mouse used, as well as the cable length.
• The mouse connection can be used for all equipment
conforming to the PS/2 mouse standards. However,
Digital cannot guarantee the FP will operate normally
for all types of host and mouse combinations.
•
This unit was developed using the Microsoft Mouse®.
Microsoft's other mouse products, the "Itellimouse" and
the "3 Button" mouse may not be used with this unit.
!!!!!
Important
Note:
Note:
Reference
Reference