Digital Equipment FP-770T Series, Руководство пользователя

Страница: 24 / 58

FP-770T User's Manual
Specifications
2-8
2-5 Names and Descriptions of FP Parts
A,B
Front View
A: TFT type color LCD
The FP units’ output display. Data from
the host are displayed.
B: Touch panel
Used to switch screens and write data into
the host.
C: Power input terminal block
Used to connect the power supply cable.
D: Setup switches (DIP switches)
Used to set the FP's operation mode.
E: Analog RGB I/F connector
Analog RGB interface connector
F: RS-232C connector
RS-232C (serial) interface connector used
to send touch panel data between the FP and
host, and to send commands to the FP.
G: MOUSE/Mouse connector
Accepts standard mouse input.
H: MOUSE/PC connector
Used to output mouse data from the FP
(to a PC). Cable from here connects to any
PS/2 compatible mouse input connector.
I: KEYBOARD/Keyboard connector
Used to connect the PS/2 compatible
keyboard.
J: KEYBOARD/PC connector
Used for FP keyboard data output.
Connects to the PS/2 compatible
keyboard input connector.
K: Front maintenance cover
Protects the FP's RESET switch and
keyboard connector.
F D E
C
K
Rear View
C F
D E
J I H G
Bottom View
!!!!!
Important
Be sure that all cables are connected correctly and that the FP is
turned OFF before any cables are disconnected, since either of these
can cause the FP to malfunction.