Digital Equipment FP-770T Series, Руководство пользователя

Страница: 39 / 58

FP-770T User's Manual 4-1
4-1 Command List
This section describes the serial commands available with the FP (command
transmission from the host (PLC) to the touch panel (FP)).
<Serial Command List>
Code Function
65h Turns on the backlight at high brightness.
66h Turns on the backlight at low brightness.
67h Turns off the backlight. (Automatic reset)
68h Turns off the backlight. (Command reset)
69h Turns on the click sound.
6Ah Turns off the click sound.
71h Turns on the buzzer.
72h Turns off the buzzer.
73h Turns on calibration mode.
74h Turns off calibration mode.
75h Turns on touch panel data output.
76h Turns off touch panel data output.
•
All codes other than those shown here are reserved. These
commands should never be issued when using the FP.
•
All data and command codes are expressed in hexadecimal
numbers. (Example: 65h = 65HEX)
Backlight ON (High brightness) 65h
Turns on the backlight at high brightness.
Backlight ON (Low brightness) 66h
Turns on the backlight at low brightness.
C h a p t e r 4
Touch Panel Commands
1. Command List 3. Boot-up Initialization
2. Touch Panel Data Input
!!!!!
Important
Note: