Digital Equipment FP-770T Series, Руководство пользователя

Страница: 34 / 58

FP-770T User's Manual
3-8
Installation and Wiring
The setup switches (dip-switches) are located in the rear of the FP.
Dip-switch
3-3-1 Operation Mode Setup and Adjustment
3-3 Setup of Operation Mode and Positioning of Display
Prior to shipment, the FP's DIP switches (SW1) have been set as shown above.
These 8 bit DIP switches (SW1) control the items listed below:
No. Function OFF ON
1
Touch Panel Output Method
RS-232C output PS/2 mouse compatible
output
2
Backlight Setting 1
3
Backlight Setting 2
4
Backlight Setting 3
See table on next page
5
Calibration Normal mode Calibration mode
6
Click Sound Click sound OFF Click sound ON
7
Reserved Set this switch to OFF
8
Reserved Set this switch to OFF
• SW1-1
Designates the touch panel data output method.
OFF
: SIO (RS-232C) output
When the FP is connected to the host (PLC), emulation software
(e.g TT-WIN) is required to perform touch operation.
ON
: PS/2 mouse compatible output
Touch panel data is converted to PS/2 mouse-compatible format,
and output through the mouse output port.
When the FP is connected to the Host's PS/2 mouse port, you can
perform touch operation without using special emulation software
or a special driver.
• The use of PS/2 mouse compatible output may be limited, depending
on the OS being used.
FP-770T (rear view)
!!!!!
Important
4-2 Touch Panel Data Input
Reference