Digital Equipment FP-770T Series, Руководство пользователя

Страница: 40 / 58

Touch Panel Commands
4-2 FP-770T User's Manual
Backlight OFF (Automatic reset) 67h
Turns off the backlight. When either SIO communication or touch
operation is performed, the backlight is turned on.
•
The backlight condition after reset depends on the DIP switch
settings (SW1-2, SW1-3, and SW1-4).
Backlight OFF (Command reset) 68h
Turns off the backlight. After a different serial command (e.g. 65h, 66h) is
received, the backlight is turned on.
Click sound ON 69h
Every time you touch the display panel a click will sound.
Click sound OFF 6Ah
Turns off the click sound.
Buzzer ON 71h
Turns on the buzzer output
Buzzer OFF 72h
Turns off the buzzer output.
•
Priority is given to buzzer output over the click sound. Thus, when
both the buzzer output and click sound are set to ON, the buzzer
output is activated.
Buzzer Click Status
ON ON Buzzer ON
ON OFF Buzzer ON
OFF ON Click sound ON
OFF OFF Buzzer and click sound OFF
Calibration mode ON 73h
Starts touch panel calibration mode. (Same function as when SW1-5 is
ON.)
Calibration mode OFF 74h
Ends touch panel calibration mode. (Same function as when SW1-5 is
OFF.)
Touch data ON 75h
Enables touch panel data output.
Touch data OFF 76h
Disables touch panel data output.
Note:
Note: