Installing the Upgrade
2-11
WARNING: The system drawer, fully configured, weighs 45 kg (100 lbs). Two
people are required to install a system drawer in the cabinet.
1. Install the new system drawer at the front of the cabinet. Position the system
drawer so that the power supply section is located at the front of the cabinet.
2. Carefully slide the system drawer onto the support rails. The interlock
mechanism will catch the drawer and hold it in place (see Figure 2–8).
3. Secure the system drawer by fastening the retaining brackets with screws (two
brackets at the front of the cabinet and one bracket at the rear of the cabinet).
See Figure 2–7.
4. Plug the power cable(s) into the power strip at the bottom of the cabinet and into
the front of the system drawer.
5. Tie-wrap the power and signal cables to either the cabinet mounting holes or
cable management bracket. Provide strain relief to cable connectors to avoid
disconnection during operation.
Figure 2–8 Interlock Mechanism (Rear)
Interlock
Mechanism
PK-0650-96
