Overview
1-5
Ê
Insert a new diskette into the system drawer diskette drive. Enter the command
show device floppy to initialize the console diskette driver.
Ë
Enter this command to make the diskette writable.
Ì
The command cat eerom >pmem:800000 saves the EV settings and ECU data
stored in ESC NVRAM to memory.
Í
Issue this command to save the TOY NVRAM EV settings and ECU data to
memory.
Î
Copy the memory contents to the diskette.
Ï
Enter this command to check if the data has been copied. You can stop the
output by issuing ^C.
