Installing the Upgrade
2-13
WARNING: The system drawer, fully configured, weighs 45 kg (100 lbs). Two
people are required to install a system drawer in the pedestal.
1. Lift the drawer onto the pedestal base.
2. Attach the drawer to the pedestal by installing the four screws at each corner of
the pedestal base (see Figure 2–9).
3. Attach the pedestal tray (see Section 2.2).
4. Attach the top cover by sliding it into the two rear brackets and install the two
screws at the front of the pedestal (see Figure 2–2).
5. Plug the power cable(s) into the power strip at the bottom of the cabinet and into
the front of the system drawer.
6. Attach the front door.
