Installing the Upgrade
2-9
CAUTION: Wear an antistatic wrist strap when working on this system.
1. Raise the levers on the CPU card.
2. Carefully lift the card out of the card cage.
Reverse these steps when installing the cards in the new system drawer.
NOTE: The first CPU card must occupy slot CPU0.
NOTE: Memory cards must be configured in matched pairs. When large memory
pairs are configured with smaller memory pairs, the largest memory cards must be
installed in the lowest order slots.
Figure 2–6 Removing a Memory Card
Memory Card
System Bus
Card Cage
PK0679-96
To remove a memory card, loosen the captive screw on the top brace of the card and
lift the card from the cage.
