8
Bracket Mode Settings for Screen
3
When the Elite 500 is displaying Screen 3, the Starting Line Enhancer time is displayed on line 1, the P.T.S.O. time is
displayed on line 2, the Push-button Mode and Interrupt time is displayed on line 3, and the S.F.O. Mode is displayed on line 4. Once
these settings are set they usually do not have to be changed unless the setup of the vehicle changes or the style of racing.
Setting the Starting Line Enhancer
If the S.F.O. mode is set to one the Starting Line Enhancer will be turned on, if the S.F.O. mode is set to any mode other than
mode one, the Starting Line Enhancer will be turned off. To set the Starting Line Enhancer Time, which is displayed on line 1 of
Screen 3, repeatedly press the Set Up key until the text S.L.E
.
is displayed on the left side of line 1. If two dashes are being displayed,
the Starting Line Enhancer is turned off. If a number is being displayed the Starting Line Enhancer is turned on. When the Starting
Line Enhancer is on to enter a new time, first press the Next key until the selection arrows are positioned to the right of the S.L.E.
time. Then press and release the Clear key the selected display line will now be blank indicating the unit is ready to accept the new
time. Now using numerical keys enter the new time, leading zeros do not have to be entered. For example if 01.00 for a S.L.E. 1 time
was desired 100 would be entered on the keypad. If less than four digits are entered for a time, pressing the Next key will act as an
enter key and the leading zeros will displayed on the LCD. As the numbers are entered they are shown on the display, indicating the
numbers are accepted and entered into memory. If a mistake is made while entering the time, press and release the Clear key and
reenter the time again.
The Scrolling Arrow keys can also be used to change the S.L.E. time. First make sure that the selection arrows are on the
line to be changed. If not change which line is selected using the Next key. Once the desired line has been selected pressing and
releasing the Up Arrow key will cause the time to increase by one. While pressing and releasing the Down Arrow key will cause the
time to decrease by one. If the Up Arrow key is held down the time will scroll up and if the Down Arrow key is held down the time
will scroll down.
Note: The S.L.E. output mode is controlled by the Throttle mode for Timer 2. This mean if the Throttle stop is working backwards
change the Throttle mode for Timer 2.
Setting the Programmable
Throttle Stop Override (P.T.S.O.)
To set the P.T.S.O. amount, which is displayed on line 2 of Screen 3, repeatedly press the Set Up key until the text P.T.S.O.
is displayed on the left side of line 2. If the P.T.S.O. is turned off, two dashes will be displayed on line 2. If a number is displayed
the P.T.S.O. is turned on and the number shown is the current P.T.S.O. time. To turn the P.T.S.O. off when it is turned on, repeatedly
press the Next key until the selection arrows are on line 2. Then press and release the Clear key followed by the Next key. To turn on
the P.T.S.O. or enter a new P.T.S.O. amount repeatedly press the Next key until the selection arrows are on line 2. Next press and
release the Clear key, the selected display line will now be blank indicating the unit is ready to accept the new time. Now using
numerical keys enter the new time, leading zeros do not have to be entered. For example if 1.00 for a P.T.S.O. amount is desired 100
would be entered on the keypad. If less than four digits are entered for an amount, pressing the Next key will act as an enter key and
the leading zeros will displayed on the LCD. As the numbers are entered they are shown on the display, indicating the numbers are
accepted and entered into memory. If a mistake is made while entering the time, press and released the Clear key and reenter the
amount again. If a number greater than zero is entered, any number from 00.01 to 99.99 seconds, the P.T.S.O. will automatically be
turned on.
The Scrolling Arrow keys can also be used to change a P.T.S.O. amount. First make sure that the selection arrows are on
line 2. If not, change which line is selected using the Next key. Once line 2 has been selected pressing and releasing the Up Arrow
key will cause the time to increase by one. While pressing and releasing the Down Arrow key will cause the time to decrease by one.
If the Up Arrow key is held down the time will scroll up and if the Down Arrow key is held down the time will scroll down.