Digital Ally, Inc. | Installation Instructions
3-10
Power Connections
4.
Connect Ignition, Battery, and Chassis Ground to the green power connector as shown below.
Antenna Connections
5.
Connect the supplied GPS receiver cable to the
GPS
connector on the
rear of the unit.
6.
Place the antenna as high up as possible in the vehicle or on the roof
of the vehicle. Make sure the antenna is horizontal and is facing up
(smaller side up), and attach it in its intended location with double-
sided tape. Make sure the antenna is attached securely to the vehicle
so that it will not come loose when the vehicle moves. If possible, place it in a location near the
roofline in which there are no obstructions between it and the sky. DO NOT place the GPS
antenna in close proximity of the other GPS antenna you installed previously in step 7.
7.
A cellular modem is required for live video streaming capabilites. Connect your cellular modem
with USB adapter to the USB port. Use a USB extension cord for connecting the cellular modem
to the unit. The modem functions best if it is installed high in the vehicle in an exposed location.
The extension cord should not be longer than about 1.5 meters. Please note that not all cellular
modems are supported. Please contact Digital Ally Technical Support for a list of supported
cellular modems.
Figure 3-10:
gateway video connections
Front camera
Video Gateway
DVM-LiVE
IGNITION BATTERY GROUND
