Digital Ally, Inc. | Parts Lists and System Diagrams
2-6
Wiring Connections Chart
Input Signal
Color
Pin #
Description
Main Power Cable (page 3-4)
Battery
Red
1
+12VDC Un-switched Power. REQUIRED. Digital Ally recommends
connecting directly to the engine compartment battery
Ignition
2
+12VDC Switched. +12V power only when ignition is in the ACC or On
position. Ignition is used to cycle the system power on and off.
Ground
Black
3
Chassis Ground. Secure directly to vehicle frame
Input Sensor Cable (page 3-5)
Reverse
Red
1
Connect to reverse gear relay, or reverse light bulb
Emergency Lights
Orange
2
Emergency Light interface. +12VDC when lights are activated. Connect
to light bar controller
Brakes
Blue
3
Connect to brake pedal switch or 3
rd
brake light. +12VDC when brake is
active
Siren
4
Connect to +12VDC when siren is ON.
Sensor 5
5
Configurable input sensor
Mic Trigger Out
Green
6
Connect to Green wire of DWM800 Wireless Microphone Cable
Mic Trigger In
Brown
7
Connect to Brown wire of DWM800 Wireless Microphone Cable
Ground
Black
8
Chassis Ground
DWM800 Wireless Microphone Cable (page 3-8)
Battery
Red
1
+12VDC Un-switched Power. Digital Ally recommends connecting
directly to the engine compartment battery
Ground
Black
2
Chassis Ground
Mic Trigger Out
Green
3
Connect to Green wire of Input Sensor Cable
Mic Trigger In
Brown
4
Connect to Brown wire of Input Sensor Cable
Remote Accessory
Out
Violet
5
Connect to auxiliary equipment (optional connection)
