Page 05
Please read the instructions carefully prior to installation
DGHDP1 -
DigiSender® HD Pro - 1080p Powerline AV Sender System
Use one of the included HDMI cables and connect
it to the socket labelled ‘HDMI Out’ on the back of
the DigiSender® Transmitter and the HDMI Input on
your main TV.
3.
Connect the IR Emitter to the socket labelled ‘IR’ on
the back of the DigiSender® Transmitter and place
the IR Emitter facing the remote control sensor on
the front of your source device (e.g. HD Satellite
receiver) .
4.
Identify the HDMI cable connecting your source
device (e.g. HD Satellite receiver) to your main TV.
1.
Disconnect this cable from the TV and connect it
to the socket labelled ‘HDMI In’ on the back of the
DigiSender® Transmitter.
2.
Installing your DigiSender®
Step 2 - Install the Transmitter
This chapter describes how to correctly install your DigiSender® HD Pro. After installation is complete you will be
able to view the connected source device (e.g. HD Satellite receiver) on another TV anywhere in your home or
office.