Page 27
Please read the instructions carefully prior to installation
DGHDP1 -
DigiSender® HD Pro - 1080p Powerline AV Sender System
Information & Safety
Important Product Information & Abnormal Operation
Important Product Information
Power Line Communication or Power Line Carrier (PLC), are systems for carrying data on a conductor also
used for electrical power transmission.
The Transmitter and Receiver units must be operating on the same AC power circuit for guaranteed performance.
This product may not perform efficiently if plugged into Power Strips (especially those with Surge Protection and
EMI / RFI Filtration) or Extension Cords. For best results it is recommended that you connect the units directly
to a mains power socket. In homes with multiple mains circuits installed, it is recommended that both units are
installed on the same circuit so that they can communicate effectively with each other.
Power sockets and electrical wiring must all be part of the same electrical system. Certain electrical conditions in
your home, such as wiring conditions and configuration, may affect the performance of this product.
Note:
Interference from devices that emit electrical noise, such as vacuum cleaners, refrigerators, hair dryers, old
electric motors and poor quality mobile phone chargers for example, may adversely affect the performance of this
product. This product may have the possibility to interfere with devices such as lighting systems that have a dim-
mer switch, short wave radios, or other power line devices that do not follow the correct wiring standard.
Abnormal Operation
• It will take 30 to 40 seconds to establish a connection between the transmitter and receiver. If
there is no signal coming through to the receiver after this time, please try the
Syncing the Trans-
mitter & Receiver
procedure on page 17 and refer to the troubleshooting section of this manual. If
you are unable to resolve your problem, please contact our support helpline on 0207 193 1413.
• If a unit is accidentally exposed to water or the case is damaged in any way, you should im-
mediately turn the unit off at the mains and disconnect the plug. The unit should be replaced at
the next available opportunity, failure to do so could result in an electrical short or fire. If you are
uncertain of your situation, please call our support hotline on 0207 193 1413.
• If any smoke or odors emanate from the units, you should immediately turn the unit off at the
mains and disconnect the plug. Continuing to use this product in these conditions could cause a
fire or damage the product irreparably. Please call our support hotline on 0207 193 1413.