Page 18
Please read the instructions carefully prior to installation
DGHDP1 -
DigiSender® HD Pro - 1080p Powerline AV Sender System
Advanced Procedures
PLC Grouping
The
PLC Grouping
procedure should only to be used when installing an additional receiver or during Trouble-
shooting when the
Transmitter & Receiver Syncing
procedure fails to resolve a problem.
1. Press the
Link Button
on the DigiSender® remote control at the Transmitter and Receiver
locations.
“Attempting PLC Grouping”
will be displayed on the receiving TV.
The
Sync LED
on the Transmitter will continuously flash
ON and OFF
and the
Power LED
will be
OFF
.
If the
PLC Grouping
is successful, the system will automatically start Syncing the Transmitter
and Receiver. After this has finished the video will be displayed (providing that the source device is
currently on and media is playing).
Note:
It is highly recommended that you perform the above procedure with both the DigiSender® Transmitter and
Receiver in the same vicinity, preferably attached to the same dual-socket mains power outlet.