DIGIQUEST
14
In the satellite scanning interface, press
OK
key to add a
√
mark on the Status
column, you can also mark two or more satellites together. It will launch the scan of
all selected satellites.
At the bottom of the window there are several options you can activate with the
various buttons.
View TP.
Highlight a satellite item, press the
BLUE
key to enter its Transponder List,
press the
YELLOW
key to add a new TP or edit a highlighting one.
Scan.
Press the
GREEN
key, it will be possible to choose the type of scan between
Satellite Scan (classic search) and Blind Scan (deeper search that scans all
transponders on the selected satellite).
When you have a system that has the capability to receive multiple satellites, you
need to set the Diseqc. Press
YELLOW
key and select
LNB Setup
. Under Diseqc
choose 1.0 or 1.1, and its ports.
To set up a motorized antenna go to Motor and select DiseqC 1.2 or Usals. To
configure it, press the
BLUE
key.
- Tivusat Scan.
In order to view the Tivusat channels you need to activate the smartcard provided.
Insert the card with the chip facing downwards, go to the tivusat.tv website and follow
the activation instructions.
- Home channel settings
To set the reference frequency of Tivùsat. It is recommended to leave it as default.
- Version
Display related software versions and so on.
- Factory Default
Reset the STB to its factory status. Confirm with
OK
or cancel by going to
EXIT
and
pressing OK.
Be cautious that after resetting, all user’s data will be lost.
- Channel List Update.
Designed to upgrade channel list.
In standby mode.
Set up to upgrade channel list when it stays on its standby mode
or not.
In operate mode.
Set up to upgrade channel list when it is being operated or not.
Time.
Set up the particular time to update channel list.
Repetition.
Set up the frequency to update channel list.
Press the
GREEN
key to upgrade immediately and press the
OK
key to save and
exit.
