DIGIQUEST
8
2.1 Prepare your equipment
Make sure that your TV has an AV input.
Ensure that the power leads to the TV, the Set Top Box are unplugged before you
commence the set up procedure.
2.2 Connecting Video and Audio
Insert one terminal with one plug into the AV output interface of STB firstly.
Video
Insert the yellow terminal into the VIDEO input on the TV.
Audio
Insert the red terminal into the AUDIO R input on the TV.
Insert the white terminal into the AUDIO L input on the TV.
2.3 Connect the antenna
Connect the antenna lead linking with satellite sign
al into the “
SAT IN
” and connect
the antenna lead linking with terrestrial signal to the “
RF IN
” on the rear of the STB.
2.4 Connect the power
a) Plug the power from the adaptor to the DC IN plughole of the receiver.
b) Plug the adaptor to the power.
c) Plug the power connector of the TV to the power.
Turning on the decoder
- Turn on the TV.
- Press the blue
button on the remote control. If no picture appears on the
screen, select the correct source on the TV using the TV remote control (HDMI1,
HDMI2 etc).