USER’S MANUAL
76
MENU SETUP
6.6.2 RS232C
At the LINK menu,
Move the cursor to the RS232C using the , buttons.
Press the ENTER button when the cursor is on the RS232C and the following screen
appears.
Use the , buttons to choose the item and use the (-), (+) buttons to set the data value.
To exit this RS232C menu, press the ESC button.
6.6.3 RS485
At the LINK menu,
Move the cursor to the RS485 using the , buttons.
Press the ENTER button when the cursor is on the RS485 and the following screen appears.
Use the , buttons to choose the item and use the (-), (+) buttons to set the data value.
To exit this RS485 menu, press the ESC button.
NOTE
SYSTEM ID : Unit distinction address at Remote keyboard.
BAUD RATE : Data transmission speed per second.
DATA BIT : Data transmission bit.
PARITY BIT : Data transmission error checking.
STOP BIT : Data transmission ending bit
NOTE:
The Set of value
bring about is
SERIAL port at DVR near side.
