DIGITAL VIDEO RECORDER
3
CONTENTS
• Make sure to switch the power off before you install the DVR.
• There is the danger of an electric shock if the DVR is opened by an unqualified service
engineer or installer.
• Avoid using the DVR outside of the reference temperature and humidity indicated in the
specification.
• Avoid exposing the DVR to violent movement or vibration.
• Do not use or store the DVR in direct sunlight or near to any source of heat.
• Do not place any object into the holes used for air circulation.
• Always use the DVR in a well ventilated location to prevent overheating.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used batteries according to the instructions.
• When the cooling fan is stopped, the below warning message will be displayed
at the monitor.
“ COOLING FAN IS STOPPED, TURN THE POWER OFF AND CHECK COOLING FAN”
In this case, do the power off right away and check the cooling fan working.
• The HDD is recommended to use enhanced IDE Hard Disc Drive type made by
Western Digital, Seagate, Hitachi and IBM, Samsung Electronics.
EXTERNAL HDD BAY (If specified as an accessory)
• Always attach the joining cable lead between the DVR and the HDD Bay for correct system
management. (Refer to the section describing the installation procedure for the EXTERNAL
HDD BAY)
• While the EXTERNAL HDD BAY is in operation never disconnect the power or connecting
cable. Before opening the top cover, you must turn off the power by the switch on the front
panel of the DVR. And then disconnect the power cord and other cables. Failure to follow
this procedure will result in lost data or malfunction of the system.
• When replacing any HDD always make certain that the replacement part is fitted in the same
place and with the same connections as the original.
All the safety and operating instructions must be read before the unit is operated.
