30
Display Menu
OSD (Onscreen Display)
•
Motion Sensor Display
- Turns the
display of the Motion Sensor to:
z
- Active: Display motion sensor of motion
detection area.
z
- Inactive: Display motion sensor except
motion detection area.
z
- Off: No display of motion sensor.
•
Motion Sensor Color
- Sets the motion
sensor color. When Motion is detected
on a channel, the moving parts of the
image will be highlighted with colored
squares (i.e. Blue Squares).
•
Motion Transparency
- Setup motion
transparency. This sets the
transparency of the Motion Sensor
blocks from 0~5.
MONITOR (8/16 CH ONLY)
•
Sequence Dwell
- Sets the cycle time
when the system is in Sequence Mode
(between 1~60 seconds).
•
Spot-Out Dwell
-The length of time to
display a camera in Spot-out mode.
•
De-Interlace Mode
- Removes the
screen spread when set to ON
•
Alarm Pop-Up Mode
- Set to ON/OFF.
Switches the screen display to any
channel when an Alarm is detected.
•
Alarm Pop-Up Dwell
- Determines the
length of time that a channel is displayed
when an Alarm is detected (between
1~60 seconds).
•
Motion Pop-Up Mode
- Set to ON/OFF.
Switches the screen display to any
channel when Motion is detected.
•
Motion Pop-Up Dwell
- Determines the
length of time that a channel is displayed
when Motion is detected (between 1~60
seconds).
