Digiever DS-1125 Pro, Руководство пользователя, Страница: 71 / 217

3.2 Quick Configuration
After you log in local display of NVR, the system will direct you to set Quick
Configuration in five main steps. Follow the instructions of the Overview of wizard to
complete the system setup.
3.2.1. Start
To initial NVR’s configuration, please study the Overview of wizard first. Through five
steps, the wizard will guide you to set up the system quickly. For further information,
please refer to chapter
2.3.1 Start .
3.2.2. Network Settings
Via network setting page, users can set up NVR’s network information including IP
address, subnet mask, default gateway IP address, and primary DNS. For further
information, please refer to chapter
2.3.2 Network Settings
3.2.3. Server Settings
Users can decide NVR’s name, password and whether to enable UPnP feature to
quickly find the NVR in the network environment. For further information, please
refer to chapter
2.3.3 Server Settings
3.2.4. Date & Time
To playback videos at the accurate time, please set up your local time and date. It is
suggested to configure NTP server to periodically adjust time. For further
information, please refer to chapter
2.3.3 Date &Time
3.2.5. Disk Management
Disk management helps users to view disk information, to build new RAID disk and to
format and remove RAID disk.
For further information, please refer to chapter 2.3.4
Disk Management.
65