CHAVE
1
2
3
4
5
6
7
8
Enables sound signal
ON
Disables sound signal
OFF
NO inputs
ON
NC inputs
OFF
Habilitation per border
OFF
Habilitation per level
ON
Blocked in both directions
ON ON
Blocked form right to left
OFF ON
Blocked from left to right
ON OFF
Cleared in both directions
OFF OFF
Enables sound signal in mid-turn
ON
Disables sound signal in mid-turn
OFF
Wait until first turn (no turning timeout)
ON ON
05 seconds turnstile 120° 05 seconds turnstile CLIP
OFF ON
10 seconds turnstile 120° 15 seconds turnstile CLIP
ON OFF
15 seconds turnstile 120° 20 seconds turnstile CLIP
OFF OFF
DIP SWITCH DS1
The switch (or dipswitch) DS2 allows programming the following actions:
- invitation
- turning speed
- passage counting
To program DS2, put each pin in the desired position, according to the table below:
CHAVE
1
2
3
4
5
6
7
8
Enables invitation
ON
Disables invitation
OFF
Nominal speed
ON
Half nominal speed
OFF
Enables clockwise counting
ON
Disables clockwise counting
OFF
Enables counter clockwise counting
ON
Disables counter clockwise counting
OFF
Enables bob return and disables box
ON
Enables box return and disables bob
OFF
Retention time of the card in the box for reading 1s
ON
Retention time of the card in the box for reading 2s
OFF
Disk emulation for MCA
ON
Disables disk emulation (Standard Control Board Operation)
OFF
Firmware Type Turnstile 120°
ON
Firmware Type Turnstile CLIP
OFF
DIP SWITCH DS2
24
Содержание catrax automatic clip
