digicon catrax automatic clip, Руководство по эксплуатации продукта

Страница: 8 / 39

TIP: CATRAX Automatic To see details about the dimensions of
Clip's items, see item 8. Technical characteristics.
4.1 Catrax Automatic Clip operation
CATRAX Automatic Clip
has a two-dimensional rotation system with two 24 V c d
electromagnets for activating the locks.
It includes a microprocessor control board where a signal enabling passage is sent
through one of the inputs, depending on the passage direction. If this signal is
recognized, the equipment will allow the movement of the arm of
CATRAX Automatic
Clip
. After half of the turning is complete (45 degrees), a 400 milliseconds returning
signal will be sent, informing the passage direction. After the signal, the arm cannot be
returned to the previous position.
Depending on the
model and configuration, if the passage is
CATRAX Automatic Clip
forced without the enabling signal, an electromagnet will be activated to prevent
passage. In addition, the equipment can emit a signal for a sound alarm and/or the
exhibition of a red sign on the upper panel display (models with pictogram). In this
case, a return signal will be sent, indicating that the turnstile was forced, informing the
direction of turn.
The image below shows how mechanism works:
CATRAX Automatic Clip's
08