Digi 5400-RM, Руководство пользователя, Страница: 25 / 42

Advanced configuration with aView Viewing group configurations
Digi 5400-RM Cellular Remote Manager User Guide 25
Viewing group configurations
To access the configuration of your device in aView:
1. Log into the aView management portal and use the search bar to filter devices by MAC
address .
Note The device MAC address is on its bottom label.
2. Click the MAC address of your Digi 5400-RM device to bring up its Details page.
3. Select the MAC address of your Digi 5400-RM device and bring up its Details page.
4. Select View Configuration in the Configuration section.
5. Select the Edit pencil icon at the top right of the page to make changes.
The Digi 5400-RM device will automatically support configuration updates after the next daily sync
around 1AM UTC. To apply changes sooner than the next scheduled sync refer to the
Using remote
commands section for details on how to send a remote command.
Use aView to upgrade firmware
1. Log into the aView management portal and use the search bar to filter devices by MAC
address .
Note The device MAC address is on its bottom label.
2. Click the MAC address of your Digi 5400-RM device to bring up its Details page.
3. Click on the Settings tab, then select the View Configuration link in the Configuration
section of the page.
4. Once viewing the configuration profile, select the Edit pencil icon at the top right of the page.
5. Select the appropriate firmware version from the Firmware drop-down list.
6. Click the Update button.
Use aView to define a custom APN
Note If your Digi 5400-RM device is unable to sync with the management portal because the device
cannot establish a cellular connection without a custom APN, refer to Use local configuration to define
a custom APN .
To define a custom APN from within aView:
1. Log into the aView management portal and use the search bar to filter devices by MAC
address .
Note The device MAC address is on its bottom label.
2. Click the MAC address of your Digi 5400-RM device to bring up its Details page.
3. Select View Configuration in the Configuration section of the page.
4. Once viewing the configuration profile, select the Edit pencil icon at the top right of the page.