15
C. CyCLICAL MOdE TO WATEr EVEry x dAyS
Press until appears. Press several times
(to advance all the days of the week) until
appears, and
flashes on the display. With the
display flashing, press or . the number of
days between watering appears on the display.
For example, if “every 30 days” appears, watering will take place once every thirty
days for the irrigation period as set in duration. to change the number of days
press or . Press to proceed to the next step.
14. settinG a start time –
WaterinG accordinG to days of WeeK
In this step, up to 4 separate irrigation start
times can be programmed in the weekly mode
(watering according to the days of the week).
Press until StARt I appears. the word OFF
(or the last start time entered) appears. Press
the word OFF flashes. Press or to set the desired start time hour (note AM
and PM). Press the minute will flash. Press or to set the desired start time
minute. Press to set StARt II and repeat the same steps for start times number
II, III, and IV for zones 2, 3 and 4 as needed.
to cancel one of the start times select it by pressing . then press and the
hour digit flashes. Press or until the word OFF appears.
NOTE:
Zones do not operate sequentially. Start time(s) must be entered for each
zone. Calculate each run time to avoid overlapping.
