17
for the pre-programmed duration. If watering needs to be stopped before the full
duration; simply press the button again.
method 2:
Press until appears. Press
to open the valve. the word On is displayed and
a water droplet appears on the lower left side of
the display. After 5 seconds, a count down of the
remaining irrigation duration appears.
to close the valve manually before the end of the
manual cycle press until On appears again. Press to close the valve.
17. rain off (shutdoWn)
this option is used to temporarily suspend the
controller operation. the irrigation schedule
remains stored in the controller memory, but is
not implemented until the suspension is
canceled. the suspension option disables the
valve.
Press until appears. Press and hold down for 5 seconds until appears
flashing. the controller is now suspended. to restore control to the controller,
press until appears, and then press and hold down the until the
disappears.
RAIn OFF can be used while a valve has been activated.
If an attempt is made to operate the valve manually while the controller has been
suspended, or if the valve is programmed to open, the word “rain” appears, and
the valve will not open.
