13
10. time format
(sWitchinG betWeen am/Pm and 24 hour)
the default time format is AM/PM. there is
also a 24 hour time format option. It is a simple
process to switch between the two formats.
Press several times until appears.
Press and the hour digit will flash. Press the
and simultaneously. the clock reading switches from AM/PM to a 24 hour
time display or vice versa.
NOTE:
the time display format can be switched at any step in the programming process.
11. ValVe selection (740-000 & 746-000 only)
the four and six station controllers allow each
station to be independently programmed. First
select the desired valve following these steps:
Press until appears with an arrow above
the valve number. Press . the arrow above
the valve number will flash. Move the flashing arrow to the desired valve number
by pressing or . Press to proceed to the next step. to program other
station, first select the station number then repeat programming the station.
NOTE:
this screen appears only on the 4-station (740-000) or 6-station (746-000)
controller.
12. settinG the WaterinG time (duration)
this setting determines the length of time that
the valve will remain open.
Press until appears. Press and the hour/
minute digits flash. Set the desired number of
hours by pressing or . Press again and
the minute digits flash. Set the desired number of minutes by pressing or .
Press to proceed to the next step.
