Diehl Metering SCYLAR INT 8, Инструкция по установке и эксплуатации

Страница: 41 / 71

Seite 41 von
71
Installation possibilities:
 Installation in a ball valve with adapter (5-piece coupling set in separate bag)
 Installation in a pocket
Installation in a ball valve with adapter
Use ball valves suitable for temperature sensor installation with M10 x 1.
 Close the ball valve.
 Unscrew the plug screw from the ball valve.
Fig. CC Installing the temperature sensor
Installation (see Fig. II)
 Place the O-ring on the mounting pin from the enclosed screw set (type A or B).
 Insert the O-ring with the mounting pin into the ball valve hole (turning the pin).
 Fix the hole end position the O-ring with the other end of the mounting pin.
fixing screw
 Insert type A (plastic) – put the screw on the temperature sensor.
 Type B (brass) put screw on the temperature sensor
and fix it with the fixation pin. Press the fixation pin completely in.
Remove the mounting pin from the temperature sensor.
 Insert the temperature sensor with the adapter screw into the ball valve and
tighten the fastening screw in a hand-tight manner (2-3 Nm).