Diehl Metering SCYLAR INT 8, Инструкция по установке и эксплуатации

Страница: 32 / 71

Seite 32 von
71
6.1.1. Flow/return setting (optional ex works)
Optionally, the installation position of the meter can be set in loop 3 ("3.5" page 58). Therefore the
installation in the inlet (flow) or outlet (return) is possible.
NOTE
This setting must be made before start operation of the meter (fill in water)
As supplied, the outlet (return) is preset and is shown as follows in the display.
Setting and number of possible changes.
To changeover, switch to the "Outlet" window in loop 3 (see 9. Operation). Pressing and holding the
button for > 6 s changes the display/setting to "Inlet".
This setting can be changed a total of 8 times by pressing the button.
NOTE
The display changes during the 6 s.
This does not influence functioning.
Sequence during changing
If the button is pressed and held for > 6 s, the meter performs the command shown in the display.
>3Sec.
<3Sec.