manualshive.com logo in svg

DIEBOLD NIXDORF DN Series K32, Руководство оператора

Поделиться
Скачать
DIEBOLD NIXDORF DN Series K32 Скачать руководство пользователя страница 6

Introduction

•

Please immediately shut down the machine if smoke, abnormal odor, or abnormal noise occurs. It
may lead to serious device damage or other derived disaster (e.g. fire disaster) if the user continues
to operate the device. The power switch shall be immediately turned off, the power plug shall be un-
plugged, and please contact and inquire handling method with the vendor or OEM.

•

Please do not maintain the machine voluntarily. Improper maintenance is very dangerous.

•

Prevent any object from dropping into the machine so as to avoid product damage.

•

Power supply shall be immediately turned off and power wire shall be unplugged if water or other liq-
uid flows into the machine, and please contact and inquire handling method with the vendor or OEM;
the device may be damaged due to short circuit if it continues to be operated.

1.6

1.6

Notices

The notices proposed in the manual shall be followed, and the device is not allowed to be
changed or connected voluntarily; the operation, maintenance and repairing which are not al-
lowed may damage the parts or device.
The notices must be carefully followed so as to avoid the injury to the user.

•

Please do not adopt unmentioned in the manual to connect the cable, and improper connection
method may lead to short circuit, damage, and burning of device.

•

Ensure that the device is placed in solid and stable level ground and fixed soundly. The product may
get deformed or damaged if installation ground is soft and unleveled, and it may lead to personal in-
jury if the device inclines.

•

Please do not operate the device in the place with high humidity or much dust. Too high humidity and
too much dust may damage the device or lead to abnormal operation.

•

Please do not hang or place any heavy object on product surface and do not store scattered object
inside the product, and please do not tread or lean on the product.

•

Please do not contact product with any liquid, inflammable object, or corrosive object so as to avoid
damaging the product by short circuit, disaster, and surface corrosion.

Copyright © 2019, Diebold Nixdorf
01750337356B

1-3

Содержание DN Series K32




















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды