Forms printer TP20
4.1.1
4.1.1
Printer control panel
1: Status display
2: TEST key
3: EJECT key
4.1.1.1
4.1.1.1
Description of operator control panel
Status display
Normal condition = "on"
Warnings = static messages
Error = blinking message
EJECT key
This key is used to eject inserted paper from the paper transport unit.
TEST key
This key triggers the internal test, or resets the printer when an error
has occurred.
4.1.1.2
4.1.1.2
EJECT key
The EJECT key causes the continuous paper feed to be ejected. If the printer has two paper paths, the
paper is ejected from the front, uncovered path (paper path 2). When the key is pressed again paper is
ejected from the rear path (paper path 1).
In the event of a TP20/TP22 error condition, the EJECT key is used in the same way as the TEST key to
trigger the reset procedure.
If errors or warning messages are being indicated by the status display, these are cleared with the
EJECT key after the remedy of the error cause.
Copyright © 2019, Diebold Nixdorf
01750337356B
4-3
