Forms printer TP20
Print unit
Print unit ID: "Wide" (=wide print unit, up to 216 mm (8.50") paper width),
"Narrow" (=narrow print unit, up to 175 mm (6.89") paper width), "None", "Un-
known"
Thermo head ID
Thermo array ID
CONFIGURATION
SETTINGS (PATH
1/2")
Configuration settings for path 1/2
The following settings are implemented via the customizing software. If you
have any queries, please contact your software consultant.
Hor. pos. (ASCII)
Horizontal first print position in ASCII text mode (in 1/180 inch), path 1/2
This setting has no effect on printing in the GDI graphics mode.
Paper grade
Paper grade "0" .. "7", Print quality optimized for specific paper type
0= Default
6 = When using a blackening unit and WN paper 01750081601
Intensity mono
Print intensity of black pixels "0" (= minimum) .. "7" (= maximum)
Print speed mono
Print speed for monochrome printing: "Opt" (print-optimized),"Max" (speed-op-
timized)
Mark type
Paper mark type for path 1/2: "Auto" (automatic setting), "No mark" (unmarked
paper), "C" (mark C center), "D", (mark D), "CL" (mark C left in narrow printing
unit), "CR" (mark C right in wide printing unit)
Vert. pos. (ASCII)
Horizontal first print position in ASCII text mode (in 1/180 inch), path 1/2
This setting has no effect on printing in the GDI graphics mode.
Paper type
Paper type: "Mono" (single color print), "Color" (dual color print)
Intensity color
Print intensity of colored pixels "0" (= minimum) .. "7"
(= maximum)
Print speed color
Print speed for color printing: "Opt" (print-optimized), "Max" (speed-optimized)
Used mark type
Paper mark used for path 1/2: "Undef" (undefined), "No mark" (unmarked pa-
per), "C" (mark C center), "D", (mark D), "CL" (mark C available left in narrow
printing unit), "CR" (mark C available right in wide printing unit)
Page counter
Page counter, number of cut documents
Copyright © 2019, Diebold Nixdorf
01750337356B
4-19
