Operation
5.11.3.1
5.11.3.1
Opening the safe door (with customized lock)
Frontload only
Frontload systems only
1.
Open the front door or the standard/design door depending on the system used (refer to the sys-
tem-specific operating manual, chapter "Basic operation").
1.
Start the T/SOP (see system-specific Operator Manual).
2.
Call up the function for the measure you require on .
NOTE
If the safe is connected to an alarm system, opening the safe or discarding the number
combination may be blocked. In this case, you will have to disarm the intruder alarm sys-
tem first.
Opening the number combination lock with 3-digit code
NOTE
Turn the dial slowly and steadily. Never use force and do not turn the dial back if you turn
past a number in the combination. Restart the whole procedure. Do not count the number
of turns but the number of times the numbers appear below the opening index.
0
90
8
0
7
0
60
50
40
3
0
2
0
10
3.
Turn the dial counterclockwise until the first
number appears exactly below the opening
index for the fourth time.
Copyright © 2021, Diebold Nixdorf
01750332558 D
5-38
Содержание DN 470 Series
Страница 11: ...Introduction Prohibition signs Climb forbidden Copyright 2021 Diebold Nixdorf 01750332558 D 1 3...
Страница 67: ...Operation Figure 5 5 T SOP Power Down Specific Modules Screen Copyright 2021 Diebold Nixdorf 01750332558 D 5 6...
Страница 84: ...Operation 3 Open card retain bin 6 Printer tray handle Copyright 2021 Diebold Nixdorf 01750332558 D 5 23...