V3.01.51
25
i) When field data is not valid, a red circle with an exclamation point in
the middle will pop up.
ii) To find out what is wrong, place your cursor over the red circle. A
balloon will open explaining what needs to be corrected.
e)
Where are the database and log files stored?
i)
Windows XP PC’s: c:\program files\dickson\dickson wizard\db
ii)
Windows Vista PC’s:
(1) If User Account Controls have been turned off, go to: : c:\program
files\dickson\dickson wizard\
(2) If User Account Controls have been left on, right click on the
Windows Start icon and click on Explore to access virtual memory.
Go to: c:\users\(user login ID)\AppData\Local\VirtualStore\Program
Files\Dickson\Dickson Wizard\
iii)
Windows 7 PC’s:
(a) If
“Show Hidden Files” is active, go to: : c:\program
files\dickson\dickson wizard\
(b)
If “Show Hidden Files” is inactive, select “Show Hidden Files” by
opening Folder Options, click the View tab, select “Show Hidden
Files, Folders and Drives”, click Apply then OK. From explorer
go to: c:\users\(user login
ID)\AppData\Local\VirtualStore\Program Files\Dickson\Dickson
Wizard\
f)
My Receiver became disconnected from the PC. After I reconnected
it,
“USB Device Attached” shows in the lower left corner and my
Loggers are not communicating.
i) Once the Receiver has lost its connection with the PC, reconnect it
then close down the WiZARD2.4 software and then reopen. The
Receiver should now show as connected.
g)
Can I ever turn off the host PC?
i) It is recommended that the host PC remain on 24/7 and rebooted a
couple times per month.
ii) If the PC is turned off for a period of time there is a possibility that
some data may be lost. The Loggers will save logged data until full
and will then write over the oldest saved data with new data.
h)
I am getting a lot of Lost Communication errors but I have not lost
any data.
i) The strength of the signal between the Logger and Receiver/Repeater
is intermittent. Find a new location for the Logger or use a Repeater to
boost the signal.
i)
I accidently pressed the Push-to-Start button while my Logger was
on and already logging. What will happen?
i) This will not affect the logger. The logger will send a transmission and
updated Time of Last Transmission. No data will be altered or missed.
j)
What do the LED colors mean
i) 10 quick blue/red/green flash = Unit Powered On
