V3.01.51
12
c)
Returning a Logger to Active Status:
i) To return a Logger to active status, connect the Logger to the PC via
the USB cable. The Edit Logger window will open. Change Status to
Active (other settings can also be changed at this time) and click on
Save Changes and Start.
ii) The Logger will be cleared and updated.
8)
Editing Logger/Repeater Settings
a) Once the system has been setup existing Loggers & Repeaters can be
modified. All fields can be modified except for Unit ID. There are two
options for changing Logger/Repeater setup:
i)
Wireless Change
: Allows changes to all fields
except for Unit ID,
Push to Start and Changing Status from InActive to Acitve.
(1)
Logger must be actively communicating
– no lost
communication errors and time of last transmission should
have been updated within the past 7 minutes. If the logger is
not communicating change via USB connection.
(2) From the Equipment Status Screen right click on the Logger and
select edit to open Edit Logger window.
(3) Modify field. More than one field can be changed at a time.
(4) Click on SAVE CHANGES AND START. A window will pop up
indicating that the change has been sent via Wireless mode.
Leave the Logger in its current location until the wireless change is
complete.
(5) The unit can not be edited and the Edit option will remain grayed
out until the changes have been completed. If after 20 minutes the
Edit option is still grey you should receive am alarm indicating that
the wireless change was unsuccessful. Bring the unit to the PC
and edit the unit via USB.
(6)
NOTE:
(a) When
changing a Logger/Repeater wirelessly, the change can
not be sent until the Logger wakes up to send data and may
require more than 1 attempt to send all changes. Depending on
the sample rate, this might take up to 20 minutes. Pressing the
logger Push to Start button will force a transmission and speed
up the wireless change.
(b) If the change needs to take place immediately use the USB to
modify setup.
ii)
USB Change
:
Use this option for faster changes and in the event
that the Logger has lost communications
(1) Connect the Logger to the PC via the USB cable.
(2) The Edit Logger window will open.
(3) Modify field(s). More than one field can be changed at a time.
(4) Click on SAVE CHANGES AND START. The Updating Logger
window will open.
(5) Once the update is complete, unplug the USB and place the
Logger/Repeater in the desired logging location.
