Dick Smith DSLED42FHDYA, Руководство пользователя

Страница: 24 / 27

FF Prev. Next FB
Pause
00:00:33/00:04:22
Play Stop
Record a paused DTV program to USB storage device
1. While in the DTV input source, check that your USB storage device is plugged into the USB
port on the side of your TV.
2. Select a DTV channel, then press PAUSE to start the Time Shift function. The TV program
will be paused on screen; the Time Shift OSD appears and recording commences. Press play
to playback the time-paused material.
3. Press STOP to stop the Time Shift function and stop recording program.
NOTE:
Please do not unplug the USB storage device when the Time Shift function is activated, as
damage to the recorded file or the USB storage device may occur. Approximately 4GB of
memory buffers about 30-40 minutes of DTV material.
Prepare to record the program
This TV allows you to pause and record the currently watched digital TV program to a USB
storage device,
and to resume viewing at the point where it was paused.
NOTE:
Formatting a USB 2.0 storage device will be needed. Save any original data on your USB
device to another device (eg.your PC) before formatting. All the data stored in the USB
device will be erased after formatting.
USB Drive Storage Format
Follow the Format instructions on page
of this Manual to format the USB device and
allocate the
amount of space for the Time Shift function.
NOTE:
The format process will take at least 2 minutes depending on the capacity of your USB device.
Please do not turn off the power or remove the USB device during formatting. The High
Speed format option is recommended for better HDTV recording results.
During formatting, a speed test will be done on the USB device. If it fails, it means the USB
device may not support the Time Shift function.
18
1. Video may become pixelated if the video bit rate is too high for your USB drive, especially
during recordings of high-definition material. If this occurs, try using a faster USB drive, or
re-format it using the High Speed Format option. Note:This may make the drive un-readable in
other USB devices.
2. The USB PVR function relies on the use of high quality USB 2.0 drives, and as such may not be
compatible with some specific USB devices, for example, low-cost USB flash-drives with slower
memory components, and some USB 3.0 flash-drives (operating in USB 2.0 mode) may not be
compatible with this TV. Also, USB hard-drives need to be low power versions (eg. portable
types), or must be used with an external power source to prevent overloading the USB socket
on the TV.
Pause
Stop
1.Video may become pixelated during recording when the Video bit rate capability of your
USB device is too low. If this occurs, try using a higher speed USB drive or reformat the
drive using the High Speed
format option.
2.The USB Timeshift function relies on the use of high quality USB 2.0 drives, and as such
may not be
compatible with some specific USB devices.
Timeshift function
23