SERVICE
EN
DiBO 29
6
Electrical part
Checks visible electric wiring and components (among other things switches) on
external visible damages. If damaged let replace the concerning parts.
7
Engine
• Engine oil: check the oil level with the level stick (to see guide engine).
• Reduction gearbox: check the oil level of the reduction gearbox.
• air filter: check or there sits no clogging for the air opening.
• Fuel filter: check on clogging and possibly clean or replaced.
See the special instructions in the engine manual (delivered).
8
Oil drain / filling high pressure pump
• oil drain: put a oil trough under the drain plug. Remove the drain plug. let all
the oil in the oil trough. assemble the drain plug (with a new packing ring).
pour the tapped oil in a can. Deliver the tapped oil by your dealership or at the
proper authorities.
• oil filling: remove the oil level gauge. Fill the engine crankcase with oil until
the oil level reaches to the middle of the gauge (type oil see technical data).
Check the oil level by the marks on the oil level gauge. place the oil level
gauge back.
9
Battery
at electric driven machine, a battery is present. Check the battery on good
connections / possible wear and whether the battery needs to be recharged.
If the idling battery voltage drops below: 12.6 V (or if stored / not used during 6
months), this must be recharged. This can happen by means of a trickle charger,
standard charger or workhouse charger. Reloading need to be done by a
qualified technician.
Caution: Ventilate sufficiently when reloading battery,
avoid risk of sparks (no smoking), care for a good
electrical connection of the charger & the battery!
