TuRn oFF
EN
DiBO 25
SCOPE OF APPLICATION
Efficient high pressure cleaning is achieved by following a few guidelines
combined with your own experiences. Each cleaning job is different and
specific, therefore contact DiBo for the best solution in your application sector.
• using cleaning products (if applicable): the surface to clean should be sprayed
so the product can act during some time (do not let it dry!) before cleaning
with high pressure jet.
Cleaning agents can increase the cleaning effect if they are used correctly!
always follow/consider the safety instructions of the used product!
• Cold water (high pressure) cleaning: removal of (mild) impurities/pollution and
rinsing.
• hot water (high pressure) cleaning (if applicable): the cleaning effect will be
such improved through increasing the temperature (set the temperature
experimentally according to the application).
• Cleaning via lance with rotating head (if applicable): cleaning method to
remove tough layers of dirt.
• Cleaning using a steam lance (if applicable): this steam function (by
overheating water) is used in ‘sensitive’ cleaning applications (eg: damage
sensitive surfaces) where there is stubborn dirt (eg: degreaser) is removed by
using steam.
Please note: this application has high cleaning
temperatures and requires various safety measures!
Intended use: this pressure washer has been developed for use in various
professional applications (eg: building technology, cleaning technology,
industrial, transport sector, ...).
Turn off
LANCE AND SPRAY GUN
Stop the machine completely (put the key switch on oFF). Close the water
supply. uncouple the lance and put it away. Roll up the high and low pressure
hoses and check on damages.
MACHINE
Clean when necessary the water filter. Clean the machine with a cloth.
WATER OUTLET
Clean to own need the water supply.
PUT AWAY MACHINE
See that the machine is stored frost-proof. put the guide/keys away within hand
range.
ENVIRONMENTALLY SAFE DISPOSAL OF USED FLUIDS
no fluids (anti-scale product, oil, petrol, diesel, softener, ...) may be disposed
randomly because of the environment! So make sure, if you are user, that the
applicable local guidelines for environmentally friendly disposal of these fluids
(without soil pollution) are complied.
TRANSPORT
please consider the following when transporting the machine: The machine is
built on a robust frame, so this can be placed stable. So, you prevent fuel leaks
or oil leaks (from the pump). The frame is provided with a lifting surface on the
bottom to replace the machine. load the machine using a lift truck, hydraulic
loading platform or a hoist. Take sufficient into account the declared weight of
the machine, where the lifting materials must be satisfied. lash the machines
(if necessary) fixed on the loading platform ( e.g. - by means of belts). Common
sense and necessary safety measures while loading, unloading and transport
are indispensable.
