ENGLISH
6
!
DANGER
When the tank assembly (CT230) is raised, the gas spring on the left side of the
machine (fig. T) must be locked in place by turning the green ring to the closed
padlock position to prevent the tanks from closing accidentally.
B -Control panel danger of short circuit.
C -Bottom of washing head: danger due to brush rotation.
D -Rear wheels: danger of crushing between the wheel and chassis.
E -Battery compartment: danger of short circuit between the battery poles and presence
of hydrogen during charging.
F - Side brushes: danger due to brush rotation.
3.4.
Accessories
•
Bristle brushes: for washing delicate floors and polishing;
•
Polypropylene brushes: for normal floor washing;
•
Tynex brushes: for removing accumulated stubborn dirt on resistant floors;
•
Drive disks: enable the following disks to be used:
∗
Yellow disks: for washing and polishing marble and similar
surfaces;
∗
Green disks: for washing resistant floors;
∗
Black disks: for thorough washing of resistant floors with
stubborn dirt.
•
CHEM DOSE (CT 230 only) (fig. G): system for controlling detergent independently
from the detergent tank.
4.
SAFETY INFORMATION
4.1.
Safety regulations
Read the "User Manual" carefully before start-up and use or before performing
maintenance or any other work on the machine.
IMPORTANT
Rigorously respect all instructions in the Manual (in particular those relating to
danger and important information) and on the safety plates fitted to the machine.
The Manufacturer declines all liability for damage to people or things resulting from
failure to observe the instructions.
The appliance must be used exclusively by persons trained in its use and/or who have
demonstrated their ability and have been expressly instructed to use the appliance.
The machine must not be used by minors.
The machine must not be used for purposes other than those for which it was expressly
designed. Scrupulously respect all safety standards and conditions applicable to the type
of building in which the machine is to be operated (e.g. pharmaceutical companies,
hospitals, chemicals, etc).
Do not use the machine in places with inadequate lighting or explosive atmospheres, on
public roads, in the presence of dirt hazardous to health (dust, gas, etc) and in unsuitable
environments.
The machine is designed for temperatures of b4°C and +35°C when in use and
b0°C and +50°C when not in use.
