Diatron Abacus junior 30 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 68

Diatron Abacus junior 30 Скачать руководство пользователя страница 60

Error! Use the Home tab to apply Címsor 1 to the text that you want to appear

here.

57

Settings

Date and time

Choose the desired time and date format.

The analyzer has a built-in battery responsible for running the built-in clock when the unit
is powered off. If the analyzer asks for date and time setting after power on, then this
battery is having problems. To resolve the problem, contact Service.

8.5.

Multi user mode

The analyzer allows operation in a multi-user environment, where users can have different
rights and access levels.
This feature is accessed upon startup, and can of course be customized.
The analyzer by deafult operates in a multi-user environment

– however the user should

not notice this functionality.

Settings

Date and time/ Set date and time

Type in the date and time.

Select formats for displaying the date.
Press

Accept

to save settings.

Press

Cancel

to go back to previous menu

keeping the old values.

Exit

Logout will leave the unit on, and the login
screen appears.

Multi user mode functionality can be enabled
in the Exit menu by adding users in User
Management.

«
...
58
59
60
61
62
...
»

Содержание Abacus junior 30





































































Отзывы:

Нет отзывов