Figure 19 shows the JP5 configuration for setting the output range to ±5V.
The following table shows the jumper position for power-up reset mode.
Output Range
10V
5V
Programmable
Polarity
D/A
Clear/Select
Mid-scale, bipolar modes
X
X
X
X
Out
Zero scale, unipolar modes
X
X
X
X
In
Figure 20 shows the jumper setting to configure the DACs to reset to zero scale. (Omit the jumper to reset to mid-
scale).
Battery Connection (JP6)
The CMOS RAM may be cleared using the 3-pin JP6 jumper block. By default, there are jumpers on pins one and
two for standard BIOS configuration.
Diamond Systems Corporation
Poseidon User Manual
Page 42
Figure 19: D/A Configuration for ±5V Output Range Example
Figure 20: D/A Configuration to Reset to Zero Scale Example
Figure 21: JP6 Jumper
